DIN mounting is recommended over tab mounting.
See
Note:
Electronic and printed versions of this
guide may not show the dimensions to scale.
Verify all measurements before drilling.
3.75” (95.25mm)
6.719” (170.66mm)
2.50”
(63.50mm)
4.00”
(101.6mm)
0.170” Dia.
(4.32mm)
2.50”
(63.50mm)
3.25”
(82.55mm)
T-600
Tip:
If mounting accessory modules, future
removal/replacement of the controller is simplified
if you do
not
install screws in the “accessory
module side” tabs of the controller (see above).
3.25”
(82.55mm)
T-IO-16
T-IO-16 or
NPB-PWR
Distance between center of tabs
from one unit to another unit.
3.48”
(88.55mm)
Accessory
module
side tabs
6.719”
(170.66mm)
Tab Mounting Dimensions
NPM-PWR,
NPB-PWR-UN,
or T-IO-16
T-600
