Humidity
Operating
10% to 90%, noncondensing
7
Storage
5% to 95%, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient temperature)
Compliance and Standards
Safety Compliance Standards
This product is designed to meet the requirements of the following electrical equipment safety
standards for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA C22.2 No. 61010-1
Note
For safety certifications, refer to the product label or the
Certifications and Declarations
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Commitment to the Environment
web
page at
. This page contains the environmental regulations and directives
with which NI complies, as well as other environmental information not included in this
document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of the product life cycle, all NI products must be
disposed of according to local laws and regulations. For more information about
how to recycle NI products in your region, visit
.
7
When transitioning a device from a storage or operation environment with relative humidity above
70%, device should be allowed to stabilize in the lower humidity environment for several hours
before use. Refer to the TB-414X
Voltage
,
Current
, and
Resistance
specifications for additional
performance derating when operating above 70% relative humidity.
TB-414X User Guide
|
© National Instruments Corporation
|
11
