background image

Product Certifications and Declarations

Refer to the product Declaration of Conformity (DoC) for additional regulatory

compliance information. To obtain product certifications and the DoC for NI

products, visit 

ni.com/product-certifications

, search by model number, and click the

appropriate link.

Environmental Management

NI is committed to designing and manufacturing products in an environmentally

responsible manner. NI recognizes that eliminating certain hazardous substances

from our products is beneficial to the environment and to NI customers.

For additional environmental information, refer to the Engineering a Healthy

Planet web page at 

ni.com/environment

. This page contains the environmental

regulations and directives with which NI complies, as well as other environmental

information not included in this document.

EU and UK Customers

 Waste Electrical and Electronic Equipment (WEEE)

—At the end of the product life

cycle, all NI products must be disposed of according to local laws and regulations.

For more information about how to recycle NI products in your region, visit 

ni.com/

environment/weee

.

电子信息产品污染控制管理办法(中国

RoHS

5

40

e

 中国 RoHS

— NI

符合中国电子信息产品中限制使用某些有害物质指令

(RoHS)

关于

NI

中国

RoHS

合规性信息,请登录

 ni.com/environment/

rohs_china

(For information about China RoHS compliance, go to ni.com/

environment/rohs_china.)

© National Instruments

11

SCB-8 Features

Summary of Contents for SCB-8













Reviews: