©
National Instruments Corporation
3
NI SCB-264X Installation Instructions
2. Verify the Components
To install and use the NI SCB-264
X
you need the following items:
•
NI SCB-264
X
shielded connector block
•
NI PXI-2532 switch module
•
One of the NI TB-264
X
connector block accessories listed in Table 1
•
Installation instructions for the NI TB-264
X
you are using, accessible
at
ni.com/manuals
•
Ribbon cables (not included)
Note
Refer to Table 1 for information about ordering ribbon cables for the NI SCB-264
X
.
•
1/8 in. flathead screwdriver
•
#1 Phillips screwdriver
•
Long-nose pliers
•
Wire cutter
•
Wire insulation stripper
Table 1.
Accessories for the NI SCB-264
X
Accessory
Part Number
Row and column cable kit for the NI TB-264
X
terminal blocks
779346-01
NI TB-2640 shielded connector block (4 × 128 1-wire matrix)
779056-01
NI TB-2640 shielded connector block, with protection resistance
779056-02
NI TB-2641 shielded connector block (8 × 64 1-wire matrix)
779056-03
NI TB-2641 shielded connector block, with protection resistance
779056-04
NI TB-2642 shielded connector block (16 × 32 1-wire matrix)
779056-05
NI TB-2642 shielded connector block, with protection resistance
779056-06
NI TB-2643 shielded connector block
(4 × 64 2-wire matrix or dual 4 × 64 1-wire matrix)
779056-07
NI TB-2643 shielded connector block, with protection resistance
779056-08
NI TB-2644 shielded connector block
(8 × 32 2-wire matrix or dual 8 × 32 1-wire matrix)
779056-09
NI TB-2644 shielded connector block, with protection resistance
779056-10
