Power Requirements
Voltage (V)
Current (Amps) Typical
Current (Amps) Maximum
+3.3 V
2.24 A
2.96 A
+5 V
2.44 A
3.11 A
+12 V
6.5 A
8.7 A
5 V
AUX
0.19 A
0.23 A
Physical
Board dimensions
Four-wide 3U PXI Express module
Slot requirements
One system slot plus three controller expansion slots
Compatibility
Fully compatible with
PXI Express Specification 1.0
Weight
1.5 kg (3.4 lb) typical
Environmental
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient temperature) with chassis fans on
High
.
Pollution Degree
2
Indoor use only.
Caution
Clean the PXIe-8880 with a soft nonmetallic brush. Make sure that the device is completely dry and free from contaminants before returning
it to service.
Operating Environment
Caution
The operating temperature must not be exceeded, even when used in a chassis with a higher temperature range.
Ambient temperature range
0 °C to 50 °C (See notes below.) (Tested in accordance with IEC-60068-2-1
and IEC-60068-2-2. Meets MIL-PRF-28800F Class 3 temperature limits,
except as noted.)
Relative humidity range
10% to 90%, noncondensing (Tested in accordance with IEC-60068-2-56.)
Notice
Processor should not throttle CPU frequency under reasonable, worst case processor work loads at high operating temperatures. If you
experience CPU frequency variation, turn your chassis fans on
High
, using the fan speed selector switch on the rear of your chassis.
Notice
0 °C to 45 °C when used with the PXIe-1071, PXIe-1078 (with kit part number 158034A-01), or PXIe-1086 chassis.
Storage Environment
Ambient temperature range
Standard
-40 °C to 71 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.
Meets MIL-PRF-28800F Class 3 limits.)
Relative humidity range
5% to 95%, noncondensing (Tested in accordance with IEC-60068-2-56.)
Maintenance
Clean the PXIe-8880 with a soft nonmetallic brush. Make sure that the device is completely dry and free from contaminants before returning it to service.
2
|
ni.com
|
PXIe-8880 SERI
