NI PXIe-7975 Getting Started Download Page 15

Note

 For EMC declarations, certifications, and additional information,

refer to the 

Online Product Certification

 section.

CE Compliance 

This product meets the essential requirements of applicable European Directives, as

follows:

2006/95/EC; Low-Voltage Directive (safety)

2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Online Product Certification

To obtain product certifications and the DoC for this product, visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link

in the Certification column.

Environmental Management

NI is committed to designing and manufacturing products in an environmentally

responsible manner. NI recognizes that eliminating certain hazardous substances

from our products is beneficial to the environment and to NI customers.

For additional environmental information, refer to the Minimize Our

Environmental Impact web page at 

ni.com/environment

. This page contains the

environmental regulations and directives with which NI complies, as well as other

environmental information not included in this document.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers

 At the end of the product life cycle, all products must be

sent to a WEEE recycling center. For more information about WEEE

recycling centers, National Instruments WEEE initiatives, and compliance

with WEEE Directive 2002/96/EC on Waste Electrical and Electronic

Equipment, visit 

ni.com/environment/weee

.

© National Instruments

15

PXIe-7975 Getting Started

Summary of Contents for PXIe-7975



















Reviews: