Figure 12.
Basic Sine Wave Generation VI Block Diagram
Figure 13.
Basic Sine Wave Generation VI Front Panel
3.
Open the VI front panel, and select the NI 5611 I/Q modulator module name specified in
MAX in the
resource name
control.
4.
Click the
Run
button on the toolbar to initiate sine wave generation.
5.
Click the VI front panel
STOP
button to stop sine wave generation.
You have successfully generated a continuous sine wave signal using the NI-RFSG instrument
driver and the NI 5673E.
NI PXIe-5673E Getting Started Guide
|
© National Instruments
|
23
