©
National Instruments Corporation
A-1
DAQPad-MIO-16XE-50 User Manual
A
Specifications
This appendix lists the DAQPad-MIO-16XE-50 specifications. These
specifications are typical at 25 °C unless otherwise noted.
Analog Input
Input Characteristics
Number of channels ............................... 16 single-ended or 8 differential
(software-selectable)
Type of ADC.......................................... Successive approximation
Resolution .............................................. 16 bits, 1 in 65,536
Maximum sampling rate ........................ 20 kS/s guaranteed
Input signal ranges
Input coupling ........................................ DC
Maximum working voltage
(signal and common mode).................... Each input should remain within
±11 V of ground and the average
of V
in
+ and V
in
– should remain
within ±8 V of ground
Device Gain
(Software Selectable)
Device Range
(Software Selectable)
Bipolar
Unipolar
1
±10 V
0 to 10 V
2
±5 V
0 to 5 V
10
±1 V
0 to 1 V
100
±0.1 V
0 to 0.1 V
