Caution
If using in Division 2 or Zone 2 hazardous
locations applications, do not connect the NI 9228 to
signals or use for measurements within Measurement
Categories II, III, or IV.
Note
Measurement Categories CAT I and CAT O are
equivalent. These test and measurement circuits are not
intended for direct connection to the MAINS building
installations of Measurement Categories CAT II,
CAT III, or CAT IV.
Measurement Category II is for measurements performed on
circuits directly connected to the electrical distribution system.
This category refers to local-level electrical distribution, such as
that provided by a standard wall outlet, for example, 115 V for
U.S. or 230 V for Europe.
Caution
Do not connect the NI 9228 to signals or use
for measurements within Measurement Categories III
or IV.
NI 9228 Getting Started Guide
|
© National Instruments
|
5
