Caution
To ensure the specified EMC performance,
operate the NI 9222 with screw terminal only with
double-shielded, twisted pair cables.
Caution
To ensure the specified EMC performance,
operate the NI 9222 with BNC only with shielded
cables.
Caution
To ensure the specified EMC performance,
the length of all I/O cables must be no longer than 30 m
(100 ft).
Cable Requirements for EMC Compliance
Select and install cables for the NI 9222 with screw terminal in
accordance with the following requirements:
•
Connect the cable shield to the chassis ground (grounding
screw of the chassis) using the shortest length of wire
possible.
•
Use shielded, twisted-pair cables (Belden 9451 or
equivalent).
8
|
ni.com
|
NI 9222 Getting Started Guide
