NI Climbing Frames Trinity Towers, Instruction Manua

Page: 14 / 43

Step 3:
•
Repeat steps 1 & 2 for all eight 3m vertical posts using all four 3” x 3” posts that are cut
straight ( Ensure that for the doubled up posts the 3” x 2.5” timber is on the bottom)
•
Ensure to use the correct length of 3” x 1.5” to support the H -frame depending on the length
of the 3” x 3” post . Note – Secure the longer 3” x 1.5” and the shorter 3” x 1.5” at different
heights, approximately 100mm above or below each other. For example, if you secure the
longer 3” x 1.5” 600mm from the bottom of the 3m posts then secure the shorter 3” x 1.5”
700mm from the bottom of the 3 posts.
•
Place the 8 vertical posts in the holes that have been dug out in the ground and make sure
the pieces of 3” x 1.5” are all facing inward