background image

Specifications

System Type:

Driver Complement:

Crossover:

Response:

Sensitivity:

Impedance:

Recommended Power:

Inputs:

Weight:

Cutout Dimension:

Bezel Dimension:

Depth behind wall:

Finish:

2-way in-wall design

6.5”  polypropylene cone woofer

1” fluid cooled soft dome tweeter coaxially mounted

2.4KHz, 18dB/octave high-pass

and 12dB/octave low-pass

62Hz - 20KHz, +/-3dB

86dB (2.83V at 1M)

8 ohms nominal

10W/ch minimum, 100W/ch maximum

spring clips

7 lbs. each

10 1/4” H  8 1/8” W

11 3/8” H  9 1/4” W

3 1/4”

Matte white (paintable)

iW1

System Type:

Driver Complement:

Crossover:

Response:

Sensitivity:

Impedance:

Recommended Power:

Inputs:

Weight:

Cutout Dimension:

Bezel Dimension:

Depth behind wall:

Finish:

3-way in-wall design

6.5” long-throw polypropylene cone woofer

(2) 1.25” fluid cooled cloth dome midranges

0.75” fluid cooled cloth dome tweeter

4KHz and 1.7KHz

12dB/octave High-pass

12dB/octave band-pass

and 12dB/octave low-pass

62Hz - 20KHz, +/-3dB

86dB (2.83V at 1M)

8 ohms nominal

10W/ch minimum, 125W/ch maximum

Professional grade spring posts

7 lbs. each

10 1/4” H  8 1/8” W

11 3/8” H  9 1/4” W

3 1/4”

Matte white (paintable)

iW2

System Type:

Driver Complement:

Crossover:

Response:

Sensitivity:

Impedance:

Recommended Power:

Inputs:

Weight:

Cutout Dimension:

Bezel Dimension:

Depth behind wall:

Finish:

3-way in-wall design

6.5” long-throw aluminum cone woofer

(2) 1.25” fluid cooled aluminum dome midranges

0.75” fluid cooled aluminum dome tweeter

4.3KHz and 1.7KHz

12dB/octave High-pass

12dB/octave band-pass

and 12dB/octave low-pass

53Hz - 20KHz, +/-3dB

86dB (2.83V at 1M)

8 ohms nominal

10W/ch minimum, 150W/ch maximum

Professional grade spring posts

7 lbs. each

10 1/4” H  8 1/8” W

11 3/8” H  9 1/4” W

3 1/4”

Matte white (paintable)

iW3

Summary of Contents for iW1










Reviews: