background image

local building codes.

Prepare the cable by stripping 1/4" to 3/8" of insulation from the ends and twisting the exposed wire

strands tightly.  The spring-loaded binding posts on the back of the speaker will accept raw wire only.

Be sure to wire both the left and right speakers "in-phase."  That is, the Positive (red) terminal on the amplifier
output must be connected to the corresponding Positive (red) terminal on the speaker.  Likewise with the Negative
(black) terminals.

All speaker cables have some sort of marking along one or both conductors to help you make the

correct connections.  Incorrect speaker phase is indicated by weak bass and the lack of a well-defined stereo image.

„

„

Operation

The 6.2 Ci was designed to handle a wide range of listening levels, but every speaker has limits.  It is important to use
common sense and listen for signs of possible distress from the speakers.  Underpowered amplifiers are most often the
cause of speaker damage.  For example, a 60-watt amplifier runs out of power when called upon to produce more than 60
watts, and the resulting distortion can damage the speaker.  If you tend to listen at high volume levels, more powerful ampli-
fiers are preferable because they are less likely to run out of power.

Noticeable distortion or harsh breakup is an indication that either your amplifier or your speakers are running beyond their
capacity, and the volume should be decreased.  If you can feel any heat emanating from the woofers or tweeter, reduce
the level immediately.  Speaker damage most often occurs from sustained high volume levels, not from transient sounds
or brief musical peaks.  Excessive boosting of bass, treble or equalizer controls can worsen the problem, and is not
recommended.

„

„

Maintenance

The 6.2 Ci's require minimal maintenance under normal use.  The grille and frame may be cleaned using a damp cloth
or a mild, non-abrasive cleaner.  Do not expose the speaker to direct sunlight, high temperatures, or moisture.  Do not
attempt to clean the actual drivers.

Limited Warranty

Valid Only in the U.S.A.

Warranty Period

For the period of 5 years for parts and 5 years for labor from date of original purchase (the warranty period) from an authorized NHT dealer, Now Hear This
(NHT) warrants that if our product fails to function properly under normal use due to a manufacturing defect when installed and operated according to the
owner’s manual instructions enclosed with the unit, it will be repaired or replaced with a unit of comparable value at the option of NHT without charge to you for
parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of NHT.

What’s Not Covered

This warranty does not cover any product which is used in any trade or business, or in an industrial or commercial application.

This warranty does not cover the cabinet or any appearance item, or any damage caused to the product resulting from: alterations, modifications not autho-
rized in writing by NHT, accident, misuse or abuse, damage due to lightning or power surges, or being subjected to power in excess of the speaker’s published
power rating.

This warranty does not cover the cost of parts which would otherwise be provided without charge under this warranty, obtained from any source other than an
authorized NHT service location.  This warranty does not cover defects or damage caused by the use of unauthorized parts or labor or from improper mainte-
nance.

Altered, defaced or removed serial numbers void this warranty.

Your Rights

The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages.  NHT limits its oblig-
ations under any implied warranties under state laws to a period not exceeding the warranty period.  Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages. The above limitations or exclusions may not
apply to you.  This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

To Obtain Service

NHT has appointed a number of authorized service companies throughout the USA should your product ever require service. To receive warranty service, you
will need to present your sales receipt showing place and date of original owner’s transaction.

To find the name and address of the nearest authorized NHT service location, call or write: 

Customer Service Department, Now Hear This, 6400 Goodyear

Road, Benicia, CA 94510.  800-NHT-9993.

Please do not return product to this address.  It is not a service location.

Keep this warranty with your sales receipt.  Record date and place of purchase for future reference.

Summary of Contents for 6.2 Ci








Reviews: