NHRC-2 User Guide
NHRC-2 User Guide
Page 7
2/28/2000
Copyright © 2000, NHRC LLC
All Rights Reserved.
Timer Address and Resolution
Timer
Address
Resolution
Seconds
Max. Value
Seconds
Hang Timer
02
1/10
25.5
Timeout Timer
03
1
255
ID Timer
04
10
2550
Enter the 4 digit passcode, the timer address, and the timer value, scaled
appropriately. For example, to program the Hang Timer for 10 seconds,
enter pppp0264, where pppp is your secret passcode, 02 is the hang timer
address, and 64 is the hexadecimal value for 100, which would be 10.0
seconds.
2. Programming the CW Messages
CW messages are programmed by storing encoded CW characters into
specific addresses in the controller. Use the Morse Code Character
Encoding table and the Programming Memory Map to determine the data
and address for the CW message characters. For example, to program
"DE N1KDO/R" for the CW ID, you would use the following commands:
CW ID Programming Example
DTMF
Command
Address
Data
Description/Purpose
pppp0#09
0F
09
D
pppp1002
10
02
E
pppp1100
11
00
space
pppp1205
12
05
N
pppp133*
13
3E
1
pppp140D
14
0D
K
pppp1509
15
09
D
pppp160#
16
0F
O
