NHP TemBreak PRO User Manual Download

Page: 18 / 105

TemBreak

PRO

B_BE-UM-001-EN

– V1.1.0

Installation

Precautions

Mounting Angles

TemBreak

PRO

MCCBs may be mounted at any angle without affecting performance.

Direction of Power Supply

Power supply may be fed in either direction with respect to the MCCB without affecting performance.

WARNING

: To prevent electrical shock and damage to equipment, disconnect and isolate power source

upstream of the MCCB before installing or servicing the MCCB including its connected accessories.

Notice

: To ensure correct performance, and integrity of equipment, the installation instructions and

recommendations provided herein shall be respected. Refer to the respective user manual and installation
instructions provided with the MCCB and associated accessories.

Positive (+)

Forward/Normal

Supply

Negative (−)

Reverse Supply

Summary of Contents for TemBreak PRO










































































































Search results

Summary of Contents for TemBreak PRO

Reviews:

Related manuals for TemBreak PRO

Brands by name

Popular brands

NHP TemBreak PRO, User Manual

Search results

Summary of Contents for TemBreak PRO

Reviews:

Related manuals for TemBreak PRO

Brands by name

Popular brands