Page 2 of 2
26704850
REV. A
1.
Turn the jukebox power off and unplug the power cord from the wall outlet.
2.
Loosely attach one of the Router Mounting Bracket with two #8-32 nuts to the lower
set of studs in the upper right corner of the jukebox cabinet.
3.
Place the Wireless Router into the lower bracket with the antenna oriented to the
right, attach the second router mounting bracket with two #8-32 nuts to the upper
studs and tighten the four nuts to secure the router in place.
4.
Plug the router power adapter into the 40984301 Power Distribution plug labeled
“ROUTER”. Route the other end above the amplifier and plug into the wireless router
5.
Plug the blue ethernet cable into the “LAN 1” connector of the wireless router, route
the other end down the to the network connection of the computer core as shown in
figure 2. Route the blue ethernet cable behind the baffle to insure the cable does not
interfere with the locking mechanism. Use the two cable clamps provided in this kit
as needed.
6.
Connect your high speed Internet connection to the “WAN” port of the wireless
router. Refer to the Network Setup Manual for further connection information.
Figure 2
WIRELESS
ROUTER
MOUNTING
BRACETS
NETWORK
CONNECTION
Baffle
ROUTER
POWER