NGM Fit Watch, Manual

Page: 12 / 15

22 ENG ENG 23
The same set activities will be found on your Fit Watch, swiping up the icon. That list is
dynamic and changes according to the day you set for each activity. Before starting the training
session, long press the related activity icon to start heart rate, distance, duration (or repetition
number) and calories detection. At the end of the training long press again Fit Watch display. All
collected data during the training session will be reported on the application, within Activity (refer
to the related chapter) .
Camera: selecting this option, camera will automatically open and you will be able to take pictures
from your watch pressing
Cancel association: will cancel Bluetooth association between
phone and device.
Activity
Within this section you will find a summary of your performed
activities during the whole day. For each activity it will be reported:
time during which you performed it (or number of repetitions for
physical exercises), burned calories and achieved target rate,
which is the distance between the set target and the effective
performed activity.
You can add more activities and targets touching " + "
Me
In this section you will find a mean summary of all your achieved targets, distances and mean speed
rate. Selecting icon you can add or edit your personal data whenever you want, and you can
choose an avatar or a photo.
CHARGING THE DEVICE
To charge the device place the magnetic cable on the related connector on the back side of the
device as shown in the figure, then connect the charging cable to a USB port. You can also charge
the phone by connecting it with the PC USB port, but in this case charging will take longer. An icon
on display will show you that the device is charging When the animation stops and the battery icon
is full you can unplug the watch from the magnetic cable.