Hunan Next Generation Instrumental T&C Tech. Co., Ltd.
NGI
l
NGI
N3410 Series
Triple-channel Programmable DC Power Supply
20
negative.
4.3.5 Configuration
Users can set IP address, baud rate, beeper, sample rate and output position in
configuration interface.
Figure 19 Configuration Interface
Steps to set parameters under
Config
:
1. Press button below
Config
on the screen to enter configuration interface.
2. Press button below
IP
on the screen.
3. Press
or
Enter
on IP address setting area.
4. Input digit by pressing numeric buttons or pressing
to move the cursor
and rotate
to adjust the value.
5. Press
or
Enter
to confirm the setting.
6. Press buttons below
Baud Rate/Beeper/Sample Rate/Output Pos
separately.
7. Press
or
Enter
on Baud Rate/Sound/Sample Rate/Output Pos setting area.
8. Press
or rotate
to select the required parameter.
9. Press
or
Enter
to confirm the setting.
