DS Series Door Station
User Manual
Revision: 22
Page 3 of 8
1 Introduction
The DS Series Door Station series is intended as a hands free speaker telephone
situated at a door or gate and is connected to a suitable analogue extension of a PABX or
key system, such as the Datis Hitec Premier SOHO PABX. Pressing the button of the
Door phone will initiate the automatic sending of a DTMF number sequence which will be
analysed and handled by the PABX.
The DS Series is suitable for flush mounting in any wall with a cavity about the size of half
a standard house brick. A surface mounting bracket option is available.
2 Features
-
Sealed to IP54 for protection against rain, water splashes and dust.
-
Voice circuit is Line powered, so main function will still work if external power fails.
-
External plug pack power required for Door strike and optional camera.
-
Stainless Steel or Brass front panel options.
-
Multiple button model to access different areas.
-
Anti vandal construction
-
Flush or Surface mount
-
Electronic control of Volume and Microphone sensitivity to adjust unit to local
environments
-
Improved Busy tone detection to suit most PABX types
3 Compliance
The DS series Door Station is fully approved and meets the Australian Communications
Authority (ACA) requirements for Electrical Safety, Telecommunications and
Electromagnetic Compatibility (EMC).
Warning:
The DS Series Door Station has been
designed for connection to a PABX and is not approved or intended for direct connection
to the Public Switched Telephone Network (PSTN).
