NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 260 / 330

13.1 Selecting Remote Interface [Remote]
WF1967/WF1968 13-2
13.1 Selecting Remote Interface [Remote]
USB interface and USB memory cannot be used simultaneously.
13.2 Display Setting [Display]
13.3 Modify Knob and Modify Direction Setting [Modify Direction]
GPIB address
Select the external control interface from
USB, GPIB or LAN(option).
When you select USB, USB ID is displayed.
When you select GPIB, set GPIB address
within the range of 0 to 30.
When you select LAN, MAC address and
port address are displayed. Set IP address,
subnet mask, and default gateway.
Set the brightness of backlight.
You can switch whether bright color
characters are displayed on a dark
background or dark color characters are
displayed on a bright background as a color
tone.
Brightness of
backlight
Color tone
Select whether the item selection moves up
or down when you turn the modify knob
clockwise (CW) while the channel mode
selection list is displayed.
Item move
direction by the
clockwise turn