4
5
P
(Program) See page 6.
0-9
For channel number or numeric
entries.
Enter
To enter channel numbers for some
devices.
Last
Goes to last channel viewed.
Rew, Play, FF, Pause, Stop, Rec
VCR transport keys.
TV/VCR and TV/DVD Combo units
For TV/VCR and TV/DVD combo units, you
will need to set up two different buttons to
control both parts of the combo unit. (See
“Direct Code Entry.”) For example, set up a
code under the TV button to control the TV
part of the combo unit AND a separate code
for the VCR or DVD under any other button
you choose.
Button Functions
Note: Some buttons on the remote might have
functions that are labeled differently on the
device you are controlling, depending on the
brand and model of your device. For example,
Last may be called RECALL or Previous
Channel; ENTER may be called DISPLAY.
Also, this remote can only operate features
that exist on your device. For example, your
device must have Previous Channel capability
for the Last button to operate this feature.
The remote powers on in TV mode.
Power
To turn selected device on or off.
Menu
Press and release
Shift
then
Menu
to display the menu on the TV. The
red LED is on continuously to
indicate the remote is in Menu
mode, VOL UP/DOWN keys oper-
ate as cursor right/left, CH+/- keys
operate as cursor up/down, and
Mute operates as OK. Press Exit key
to exit Menu.
Info
Brings up current Channel and
system information.
Guide
To view the program guide.
Vol+/-
To adjust the volume level.
M
(Mute) To mute or restore the volume.
CH+/-
To change to next higher (or lower)
channel.
Shift
Press and release to access buttons
labeled in blue (red indicator stays
on). Press again to exit Shift mode.
Exit
Used to exit or clear on-screen menus.
A-B
Operates as TV/Video, TV/VCR,
etc., depending on mode.
Button Functions, cont.
