11
On the
Wireless LAN Settings
menu, click on
Scan
to search for your Wireless Router
SSID you which are attempting to connect to.
Note:
You might need to click on Scan a second or third time for the full list of SSIDs to
show up.
Once you see the SSID of your router, select it from the list and ensure the
Using Wire-
less
LAN
check box is selected. This will automatically fill in the
SSID, Network Type and
Encryption
fields which correspond to your router. Verify that these parameters are correct
based on your router configured settings.
Under the
Share Key
field, make sure to enter the wireless password from your router.
When done, click on
Submit
. Once you see the automatic restart message window, discon
-
nect the wired LAN cable.
The camera will automatically connect to your wireless router after the camera has
fully restarted. In the event you are not able to access the camera with the address
you assigned in previous steps, disconnect the power from the camera for several
seconds and then plug it back in. Once the camera boots up, try accessing the camera
once again.
On the left pane, click on
Wireless LAN Settings.
3.
4.
5.
6.
2.
Nexxt Solutions - IP Cameras XPY 500-510-520 Series