Nexxt Solutions - 24 port gigabit switch
Nexxt Solutions - 24 port gigabit switch
Installing the switch in standard 19-inch rack
Rack-mount “L” bracket installation
2.2.2 Installation in a standard 19-inch rack
To install the mounting brackets on the switch, follow the steps described below.
• First, make sure the rack is properly secured, stable and strong enough to support the
weight of the switch.
• Attach the two mounting brackets on both sides of the switch using the supplied screws.
• Place the unit into the rack, making sure the mounting holes on the device line up with the
mounting holes on the rack.
• Fasten the chassis in the rack with the screws.
2.3 Connection of the switch
1. Plug the switch into a nearby power outlet with the supplied power cord.
2. Then use ethernet cables to connect the switch to network devices, such as a PC with a
NIC port.
3. Switch ports will automatically adjust to the characteristics (MDI-II/MDI-X, speed, duplex)
of the device that is connected.
The orange Link/Act LEDs for each port will flash when the link is available.
Mode select
M1 Network
cloning
M2 Standard
M3 Port
trunking
M1 Port
isolation
24- Port Gigabit Ethernet Switch
Axis2400R
23 (Uplink)
24 (Uplink)
Mode select
M1 Network
cloning
M2 Standard
M3 Port
trunking
M1 Port
isolation
24- Port Gigabit Ethernet Switch
Axis2400R
23 (Uplink)
24 (Uplink)
Mode select
M1 Network
cloning
M2 Standard
M3 Port
trunking
M1 Port
isolation
24- Port Gigabit Ethernet Switch
Axis2400R
23 (Uplink)
24 (Uplink)
Mode select
M1 Network
cloning
M2 Standard
M3 Port
trunking
M1 Port
isolation
24- Port Gigabit Ethernet Switch
Axis2400R
23 (Uplink)
24 (Uplink)
