Quick installation guide
13
14
2
16
17
18
15
3
20
19
1.
To connect to the router wirelessly, click on the wireless
icon on your taskbar.
2.
Proceed to select the
Wireless network followed
by
Connect
. By default,
the wireless SSID is
Nexxt_XXXXXX (whereby
“x“ represents the last
digits of the MAC
address).
5. Connecting to Wi-Fi using Windows 10
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
FCC statement
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV techni-
cian for help.
Caution!
FCC ID: X4YAMP300
5.
The Advanced settings page allows the configuration of
additional parameters of the router, such as QoS,
Firewall, Port forwarding, NAT, and more.
3.
Enter the user-defined or
preassigned password, if
any, and click on
Next
to
continue.
4.
If the link is successfully
established, the
Connected
message will come up on
the screen.
Amp
300
WIRELESS-N
HIGH-POWER ROUTER
