Nexxt Solutions - Integrated Wireless IP Camera
56
Can’t access the IP camera on the internet?
There could be a number of reasons:
1. ActiveX controller is not installed correctly.
2. The port IP camera being used is blocked by
Firewall or an anti-virus software. Use a different
port number and try again.
3. Port mapping failed. There are two ways available
for configuring port mapping:
Open the setting page of the router which the IP
camera connects with to allow the UPNP function.
Go to the IP camera’s ‘
UPnP Settings
’ to enable
UPnP, making sure the “
UPnP
” configuration is
successful.
If your router has the Virtual Map function, enter
the router setting page, and add the IP camera’s IP
address and port number to the Virtual map list.
Problems with using the Firefox browser -
monitoring pages are not displayed normally
Due to security issues, the Firefox browser does not
support ActiveX controls, but it provides a
plug-in named
IE-Tab
which enables Firefox to
support ActiveX controls. Using the Firefox browser,
you can access the website as follows:
https://addons.mozilla.org/en-US/firefox/addon/1419.
On the download page, select the right version for
your browser, download it, and start installing the
plug in. The installation steps for the Firefox browser
(version 2.0.0.18) plug-in are detailed as follows:
1. Select the right version, as shown in the figure
below.
Summary of Contents for AILR6324U1
Page 1: ......
