Quick Installation Guide
Step 4
Step 4
2
Step 4
To do so, right click
Network > Properties > Change
adapter settings
, followed by
Local area connections
> Properties
. Next, double click on
Internet protocol
version
(4 or 6 based on your connection) and finish
by selecting
Obtain DNS server and IP address
automatically
. Please note that the path indicated
above relates to Windows 7. Other operating systems
may differ, so make sure to follow the instructions of
the operating system you are using. If you later wish
to customize your wireless router configuration, click
on the
Advanced Settings
menu.
If the computer you used to set up the router can
access the internet, it means that you have success-
fully configured the device, and that other computers
in the LAN should also be able to do the same. If they
don’t, verify that the Internet Protocol is set to obtain
the IP and DNS settings automatically.
4.
W
Warning
FCC Statement
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
