Maintenance and inspection schedule
If the boat does not accumulate the hours indicated below within 3 months, the frequency is
every 3:rd month.
Warning !
Failure to rectify any faulty conditions discovered as a result of the inspection could cause
sudden loss of Autopilot control, with consequential danger. It is recommended that all
items referenced in the following table be inspected before commencing any cruise.
Type
Equipment:
Check for:
Remedy:
Inspection
Frequency:
Mechanical
Linear drive
Corrosion
Replace or Repair
2000 hrs
Tiller arm
Corrosion
Replace
2000 hrs
Tiller bolts
Corrosion
Loosening
Replace
Tighten
2000 hrs
500 hrs
Rod end bolt
on linear drive
Corrosion
Loosening
Replace
Tighten
2000 hrs
500 hrs
Trunnion bolts
on linear drive
Corrosion
Loosening
Replace
Tighten
2000 hrs
500 hrs
4 Specifications
Type of Pumpt:
Reversible gear pump.
Total length at mid stroke:
728 mm
Height:
125.6mm
Width:
142.7mm
Maximum stroke:
254 mm
Distance from centre of mounting
plate to tiller bolt at mid stroke:
505mm
Tiller bolt diameter
12mm
Mounting plate size
100x100 mm
Mounting screws
4x9mm Ø at 76mm centres
Lead length
1000mm
Temperature range
-20ºC to +55 C
Supply voltage
12V (10-16V)
Enclosure
IP44 (splash proof for under deck installation)
Peak thrust:
500kg
Average power consumption:
3 - 5 A ca 36 Watts (at 12V)
Warranty period:
2 years, see separate conditions
CE approval: The product conforms to the EMC requirements for immunity and emission
according to EN 5008-1 and EN 55022
SPECIFICATIONS
