P. 3
Installing backup batteries to your weather station
Your weather station requires 3 “AAA” alkaline batteries to provide backup power to it in the event of a
temporary power interruption.
1.
Place your unit face down on a flat surface.
2.
Slide and remove the battery cover at the bottom of your unit.
3.
Insert 3 “AAA” alkaline batteries into the battery compartment by observing the “+” and “-“ polarity as
indicated.
4.
Replace the battery cover.
If the AC main power is interrupted, the backlight will go off. The backup batteries will keep the time and all
settings of your unit. Press
once to turn on the backlight for 5 seconds.
Remarks:
Keep in mind that your outdoor transmitter has a
180-ft
open air transmission with no obstructions.
Actual transmission range will vary depending on what is in the path of the signal. Each obstruction (roof,
walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
Insert the holder to the bottom of the outdoor transmitter for desktop or insert it to the back of the
transmitter for wall mount purpose.
TO SET YOUR UNIT MANUALLY
The setting of your unit comes into the sequence of 12/24 hour, hours, minutes, year, month, date, month-
date/date-month display and snooze duration.
1. Press and hold
for 2 seconds
, time digits change to “1
2Hr
“ and flash. Press
or
to select
“
24 Hr
” time format if need. When 12Hr time format is selected,
PM
indicator will be displayed.
2. Then press
once again, “
12
” the hour digits flash. Press
or
button to
set the hours. Press and hold
/
will accelerate your setting faster.
3. Then press
once again, “
00”
” the minute digits flash. Press
or
button to
set the minutes. Press and hold
/
will accelerate your setting faster.
4. Then press
once
again, “
Yr
” and “
2013
” digits flash. Press
or
button to
set the year.
