11
Locating and Installing the Mount
For these steps you will need the following parts:
•
Mounting Template
•
(4) Lag Bolts
Step 9:
Using the Mounting Template and tape, determine how high your mount needs to be located according
to the [D] Shelf Depth measured in Step 8 and the below table.
Note:
The Transcend Pro Surface must always be able to lower its full travel with no obstructions.
Step 8:
Measure depth [D] of your Shelf or Mantel, if you do not have a Shelf or Mantel proceed to the next step.
Shelf Depth [D]
Mount Height [H]
Step 8
Step 9
Summary of Contents for Transcend Pro Surface
Page 1: ...Transcend Pro Surface Installation Instructions...
Page 2: ...2...
Page 20: ...20 866 500 5438...
