14
The Menu System
Press the MENU button on your remote control and you can see the Main Menu on the screen.
The OK button always confirms your selection and pressing it will take you to the next step. You
can also go back to the previous step by pressing the MENU button. You can move upwards
and downwards by pressing the
buttons.
Selecting Menu Language
1. Press the MENU button on your remote control.
The Main Menu appears on the screen
2. Select ‘Language’ by using the
buttons.
3. Select desired language by using the
buttons. The menu appears in the selected
language.
Selecting Audio Language
1. Press the MENU button on your remote control.
2. Select ‘Language’ by using the
buttons
and press OK.
The Language menu appears on the screen.
3. Select ‘Main Audio’ by using the
buttons.
4. You can select your preferred language as a
main audio language by using the
buttons.
You can also select the alternative audio language
and subtitle language in this menu.
The following section contains all the steps necessary when first installing and using the receiver.
1. Connect the coaxial cable from the VHF/UHF antenna to the AERIAL socket on the rear
panel of the STB.
2. Connect the SCART or RCA leads between the main SCART or RCA socket on the TV;
and the TV SCART or RCA sockets on the rear of the STB.
Getting Started
Press the button on the remote control or the button at the front of the STB set.
Please Note: On Standby mode the current time will be displayed.
Step.
Basic Presetting
3
Step.
Switching on the STB
2
Step.
Installation
1
