nextmate NMDH304, User Manual

Page: 22 / 97

April 8, 2009 NextMate V1.12 22
3-3 PTZ Mode
Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ icon
will appear on upper left of the screen but it can be re-located on any place of your screen by
dragging the mouse.
Table 3-3.1 Remote Control functions under the PTZ mode
Button Description
/ SLOW
Move PTZ up.
/ Move PTZ down.
/ Move PTZ to the left.
/ Move PTZ to the right.
ZOOM + PTZ zoom-in.
ZOOM - PTZ zoom-out.
FOCUS + PTZ focus-in.
FOCUS -
PTZ focus-out.
IRIS + PTZ iris-open.
IRIS - PTZ iris-close.
TOUR Activate PTZ pre-set tour.
＊
Number
Setup the Preset location
Press “PRESET” key first then two-digit number; DVR will set the current
PTZ location at entered preset number.
PLAY+
Number
Go to Preset location
Press “PLAY” key first then two-digit number, PTZ will go to the
correspondent preset number location.
PIP
Set current PTZ location as the start of line-scan.
＊
FREEZE Activate auto line-scan.
＊
ZOOM
Set current PTZ location as the end of line-scan.
＊