Bluespoon™ AX2 overview and features.
FIG 1-Front view FIG 2-Rear view FIG 3-Side view
Charging port for Battery drawer with
Mini-USB cable and neck carrying strap finger grip Charging port for
Mini-USB cable and
Center button neck carrying strap
TALK
(blue and red
light)
Earpiece with
Soft spring
Button Button
VOLUME DOWN VOLUME UP Loudspeaker Microphone
FIG 4-Charging the battery FIG 5-Changing the battery
ONLY USE ORIGINAL BLUESPOON™
Mini-USB plug connected
AX2 BATTERIES!
Coin Cell type battery
to headset (Widest side downwards)
Charge headset
for 8 hours
before “first
time use”
Battery drawer out
Normal USB plug (drawer can be pulled all
Connected to computer the way out)
FIG 6-Preparing the earpieces FIG 7- Left or right ear usage
Two earpieces with soft springs are supplied.
Put one of the earpieces with softspring on the
Soft springs are made extra long, and can be cut by headset, and turn it to the approx. angles shown
you to fit your ear.
below.
Soft spring part We recommend that you You may adjust earpieces further for a more comfortable fit.
cut a little piece of the
soft spring at a time.
Approx. 0.3 cm.
(0.125 inches)
Put the earpiece with soft
spring on the headset, and
try headset on.
Additional cutting might be
needed. Use scissors or a
hobby knife for cutting.
NOTE
: Remember to put
earpiece with soft spring on
headset when trying it on.
Left ear Right ear
FIG.8-How earpiece/headset sits in your ear
A) B) A) Illustration shows how the earpiece with soft spring
should sit in your ear.
Do not place earpiece with soft spring in the ear, without
the headset attached (illustration is only to show position
of the earpiece)
HOW TO PLACE HEADSET:
Hold headset with three fingers, insert the headset in
your ear. Use your indexfinger to bend the soft spring.
Place soft spring in the upper bend of your ear
(see illustration A)
B) Illustration shows how the headset should sit in the right
ear.
Summary of Contents for Bluespoon AX2
Page 8: ......
