12/6/2019
30
CEL-FI QUATRA OPTIMIZATION FEATURES
Antenna Positioning
The QUATRA 4000 system can accept up to four individual donor signals. One per carrier. Each donor can be
established to the system either via small cell or off-air. When using an off-air signal, a directional antenna is
recommended to provide the best signal quality. (Nextivity offers a number of directional antennas that can be used.
The Antenna Pointing feature allows you to easily optimize the direction your external antenna should be pointed.
The algorithm takes into account the system gain and radio environment (including signal strength, signal quality,
and pilot pollution).
This feature is designed to work with the Cel-Fi Mount, which is an indoor/outdoor mount with a proprietary 8-
position dial base. This dial enables the antenna to be rotated in 45-degree increments.
1.
Make sure the Cel-Fi COMPASS is connected to the donor antenna using the (included) SMA to N
adaptor.
2.
Click on “Antenna Positioning” in the WAVE PRO app.
3.
Rotate your antenna to a position on the dial mount and tap the corresponding number button. You will
need to test 2 or more positions to see the results.
4.
The app will show the recommended band to use.
Step 2
Step 3
Step 4
Signal Report
A Full Signal Report scans all bands and channels for each carrier and returns a list of the channels it finds with RF
metrics.
1.
Go to the optimization section in the WAVE PRO app and click on “Full Signal Report”
2.
Press the "Start Test" button to begin measuring
3.
Can take up to 20 minutes before the app shows network information
Note: This scan will be quicker and more accurate when you have a SIM card installed.
You can export the Signal Report by selecting the "More" icon and "Email Report". Type in your email address and
results will be sent as a text attachment.
