NEXTIVITY CEL-FI QUATRA 1000, Installation And User Manual

Page: 25 / 32

25
Power
Power the Network Unit and Commission the System
IMPORTANT

There are two ways to commission a QUATRA system
1. Using the WAVE Portal ( now )
2. Using the QMT app ( coming soon! )

The QMT app is essentially a smart phone app frame for the WAVE Portal

Available on Android-only.
 Make sure that the NU mode is properly set to Internal Antenna, External Antenna, or Small Cell
using QMT or the Cel-Fi WAVE Portal (you can access your system record using the NU serial
number.)

If using a small cell, verify the small cell is commissioned and transmitting before
commissioning QUATRA.
1. Once a donor signal is available to the NU and CUs are connected, plug in the NU power supply.
2. QUATRA will communication with the portal via the LAN connection (Internet).
3. Follow the on-screen (WAVE portal) prompts to connect to the Cel-Fi QUATRA system.
4. Complete the commissioning steps.
NOTE : If you are commissioning a QUATRA 1000 with a Directional Antenna, the commissioning
will include the AntennaPositioning process.
Once commissioning is completed, the Cel-Fi QUATRA system should be providing service.
At this time, LEDs should be SOLID GREEN.

If an LED is blinking GREEN , wait for the process to complete.
 If an LED is RED , please see Troubleshooting .