Safety Precautions
• When installing the equipment, all the requirements
of the manufacturer and the referenced standards
must be met.
• There are no user serviceable parts inside.
Warranty
Nextivity Inc provides a limited warranty for its prod-
ucts. For details, please refer to
http://cel-fi.com/war
-
ranty
Limitation of Liability
In no event shall Nextivity, nor its directors, employees,
agents, suppliers or End Users, be liable under con-
tract, tort, strict liability, negligence or any other legal
or equitable theory with respect to the Products or
any other subject matter of this Agreement (i) for any
lost profit, cost of procurement of substitute goods
or services, or special, indirect, incidental, punitive, or
consequential damages of any kind whatsoever or (ii)
for any direct damages in excess of (in the aggregate)
the fees actually received by Nextivity from End User
with respect to the Products actually purchased and
paid for.
See www.cel-fi.com for list of patents covering this
product.
FCC
Part 90 and Part 20 Signal Boosters.
THIS IS A 90.219 CLASS B DEVICE
WARNING
. This is
NOT
a
CONSUMER
device. It is designed for installation
by
FCC LICENSEES
and
QUALIFIED INSTALLERS
. You
MUST
have an
FCC LICENSE
or express consent of an FCC License to operate this device.
You
MUST
register Part 90 Class B signal boosters (as defined in 47
CFR 90.219) online at
www.fcc.gov/signal-boosters/registration
.
Unauthorized use may result in significant forfeiture penalties,
including penalties in excess of $100,000 for each continuing violation.
WARNING
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Statement
NOTE
: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equip-
ment and the receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interfer-
ence, and
2. this device must accept any interference re-
ceived, including interference that may cause
unde- sired operation.
In order to comply with FCC RF Exposure require-
ments:
Do not call your service provider until you have read the User Manual.
If you need help, visit: www.cel-fi.com/support/
Cel-Fi
®
SOLO RED
for Public Safety
MODEL NUMBER:
L41-7EB
MODEL NUMBER:
L41-7EB
PRODUCT INFORMATION
PRODUCT INFORMATION
Cel-Fi
®
SOLO RED
for Public Safety
1.
The donor antenna must be installed to
provide at least 65 cm separation from
the human body at all times.
2.
The server antenna must be installed to
provide at least 20 cm separation from
the human body at all times.
C
autio
n
This device may be operated ONLY in a fixed
location for in-building use. Home/personal use is
prohibited.
External Antenna: Only the antennas listed in the
Antenna Kitting section of the user manual are
allowed to be used with this device. Use of
unauthorized antennas, cables, and/or coupling
devices not conforming with ERP/EIRP and/or
indoor-only restrictions is prohibited.
Safety Precautions
• When installing the equipment, all the requirements
of the manufacturer and the referenced standards
must be met.
• There are no user serviceable parts inside.
Warranty
Nextivity Inc provides a limited warranty for its prod-
ucts. For details, please refer to
http://cel-fi.com/war
-
ranty
Limitation of Liability
In no event shall Nextivity, nor its directors, employees,
agents, suppliers or End Users, be liable under con-
tract, tort, strict liability, negligence or any other legal
or equitable theory with respect to the Products or
any other subject matter of this Agreement (i) for any
lost profit, cost of procurement of substitute goods
or services, or special, indirect, incidental, punitive, or
consequential damages of any kind whatsoever or (ii)
for any direct damages in excess of (in the aggregate)
the fees actually received by Nextivity from End User
with respect to the Products actually purchased and
paid for.
See www.cel-fi.com for list of patents covering this
product.
FCC
Part 90 and Part 20 Signal Boosters.
THIS IS A 90.219 CLASS B DEVICE
WARNING
. This is
NOT
a
CONSUMER
device. It is designed for installation
by
FCC LICENSEES
and
QUALIFIED INSTALLERS
. You
MUST
have an
FCC LICENSE
or express consent of an FCC License to operate this device.
You
MUST
register Part 90 Class B signal boosters (as defined in 47
CFR 90.219) online at
www.fcc.gov/signal-boosters/registration
.
Unauthorized use may result in significant forfeiture penalties,
including penalties in excess of $100,000 for each continuing violation.
WARNING
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Statement
NOTE
: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equip-
ment and the receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interfer-
ence, and
2. this device must accept any interference re-
ceived, including interference that may cause
unde- sired operation.
In order to comply with FCC RF Exposure require-
ments:
Do not call your service provider until you have read the User Manual.
If you need help, visit: www.cel-fi.com/support/
1.
The donor antenna must be installed to
provide at least 65 cm separation from
the human body at all times.
2.
The server antenna must be installed to
provide at least 20 cm separation from
the human body at all times.
C
autio
n
This device may be operated ONLY in a fixed
location for in-building use. Home/personal use is
prohibited.
External Antenna: Only the antennas listed in the
Antenna Kitting section of the user manual are
allowed to be used with this device. Use of
unauthorized antennas, cables, and/or coupling
devices not conforming with ERP/EIRP and/or
indoor-only restrictions is prohibited.
