Nextiva S2750e Series
Installation Guide
www.verint.com/manuals
4
For more information, refer to the Nextiva S2750e Series User Guide, which is available on www.verint.com/manuals.
© 2007-2009 Verint Systems Inc. All Rights Reserved Worldwide.
23-500-0027-002
2. Start SConfigurator by double-clicking
SConfigurator.exe
on your
hard disk.
3. In the General tab, click Program Options.
4. Check Detect All Units on LAN.
5. Ensure that the VSIP Port is 5510; otherwise, click Default.
6. Ensure that the Discovery IP Address is 255.255.255.255;
otherwise, click Reset to Broadcast.
7. Click OK.
8. Select the Units tab, then click Discover. A device of type “Unknown”
with a 169.254.X.Y IP address appears in the Units box; it
corresponds to your new device.
9. Select the unknown device, then click Configure.
10. In the Reconfigure unit? confirmation window, click Yes.
11. If you have a DHCP server on your network, check Use DHCP.
Otherwise, enter the IP address, subnet mask, and gateway of the
device, as provided by your network administrator.
12. Click OK. The device reboots with its new network settings.
13. In the Units tab, click Discover to update the list of devices and see
the S2750e with its new settings. The S2750e initial configuration is
now complete.