North America:
+1-888-747-6246
| CALA:
+1-303-254-7005
Email:
EMEA:
+44 (0) 845-843-7333
|
Mobile Support
:
+49 (0) 4321-269 81 36
Email:
APAC:
Hong Kong: +852 2797 5678
|
Singapore: +65-68266099
Email:
© 2010 Verint Video Intelligence Solutions. All Rights Reserved Worldwide. All other trademarks and product names are the property of their respective
owners. Part Number: 23-500-0073-A01
Related Documentation
Nextiva
HDR 1800 User Guide
Nextiva
Administrator Guide, version 6.1
To obtain the latest version of the Nextiva documentation, please visit:
www.verint.com/manuals
Once you configure network settings for the HDR 1800, you must set its monitor output settings (see the next
section), and then register the HDR 1800 with Nextiva VMS (see
Registering the HDR 1800 with Nextiva VMS
on
page 6
).
Configuring Monitor Output Settings
Before adding an HDR 1800 to Nextiva VMS, you must configure its monitor output settings. This involves
setting the number of tiles or video outputs to display on each of the monitors connected to the HDR 1800, as
well as setting the connector type (DVI, VGA, or Composite) for the monitors.
This section provides the procedure for configuring monitor output settings for the HDR 1800.
To configure monitor output settings for the HDR 1800:
1. In the HDR 1800 Service Generator Browser pane,
select a Partially Discovered HDR 1800 that you
want to configure.
The configuration parameters for the HDR 1800
appear directly below the HDR 1800 Service
Generator Browser pane.
2. Select the Layout tab.
3. Set the following parameters to configure monitor
output settings for the HDR 1800:
For a Single monitor configuration:
a. Deselect the Monitor 2 option (default
selection).
b. Select the Tile Layout for the monitor.
c. Select the Connector Type for the monitor: DVI
(default), VGA, or Composite.
For a Dual monitor configuration:
a. Select the Monitor 2 option. The configuration
settings for Monitor 2 are enabled.
In a Dual monitor configuration, the Connector
Type for the first monitor in the configuration
automatically switches to DVI and the system
prevents you from changing this setting. You
must make sure that Monitor 1 is connected to
the DVI port on the HDR 1800.
The Monitor Type setting for Monitor 2 is always
set to Dual (extended desktop); this setting
cannot be changed.
b. Select the Tile Layout for each monitor.
NOTE:
In a Dual monitor configuration, the total
number of tiles on both monitors cannot
exceed 18 tiles.
c. Select the Connector Type for Monitor 2: VGA
(default) or Composite.
4. Click Apply to save the configuration settings.
Once you configure network and monitor output
settings for the HDR 1800 you register it with Nextiva
VMS.
Registering the HDR 1800 with Nextiva VMS
When an HDR 1800 is registered with Nextiva VMS, you can use the System Setup Wizard to add the HDR
1800 to Physical and Logical Groups, configure physical settings (audio output, aspect ratio, serial ports, etc.)
for the HDR 1800 in the Physical View, as well as configure the HDR 1800 in Nextiva Virtual Matrix (assign
Monitor IDs, startup video sources, and CCTV keyboards). For more information, refer to the Nextiva
HDR 1800
User Guide
.
To register the HDR 1800 with Nextiva VMS:
1. In the HDR 1800 Service Generator Browser pane, select a Partially Discovered HDR 1800 that you want
to register with Nextiva VMS.
2. Click the Register/Unregister button.
Once the HDR 1800 is updated with the new configuration, its configuration state changes to Fully Discovered.