Nextech QV3500, Instruction Manual

Page: 9 / 16

8
MENU FUNCTIONS:
1. Channel select: press “OK” or “MODE” key to enter into channel select,
then press “ ▲ ”or “ ▼ ” key to choose all or CH1 to CH4 and press “OK” and
“MODE” key to confirm it.
2. Flameout Delay: Press “ ▲ ”or “ ▼ ” key to choose flameout delay. There are
5sec, 10sec, 3min, 10min, 30min, 1 H, 2H, 6H, 12H optional. (Please note
that after chose this function, the monitor will still work after flame out)
3. Record Time:
press “ ▲ ”or “ ▼ ” key to choose record time, then press “OK”
or” MODE” key to confirm, and then press “ ▲ ”or “ ▼ ” key again to choose
the record time from 3min, 5min, 10min, 15min, 20min, 30min and press
“OK” or “MODE” key to confirm. 5Min as default.
4. Record Mode: press “ ▲ ”or “ ▼ ” key to choose record mode and press “
OK” or “MODE” key to confirm. And then press “ ▲ ”or “ ▼ ” key to choose
from automatic, scheduled, alarm, aualarm and plan+alarm, press
“OK” or “MODE” key to confirm. Automatic as default.
5. Image Flip: press “ ▲ ”or “ ▼ ” key to choose image flip and press “OK” or
“MODE” key to confirm, and then press “ ▲ ”or “ ▼ ” key again to choose
normal or horizontal to adjust camera image direction. Normal (Mirror) as
default.
6. Encode Setting: press “ ▲ ”or “ ▼ ” key to choose encode setting and press
“OK” or “MODE” key to confirm and enter into it. There are options for
channel select, resolution (1280*720), image quality (general, good, very
good, advanced) and advanced setting (frame rate, rate type, rate and
frame interval).
7. Print Setting:
press “ ▲ ”or “ ▼ ” key to choose print setting and press “OK’’
or “MODE” key to confirm and enter into ii. There are options for channel
selection for all channel or CH1 to CH4 single channel, time print on/off,
cars print on/off, channel print on/off, location print on/off and speed print
on/off. Channel print on, time print on, cars print on, location print off and
speed print off as default.
8. Audio: press “ ▲ ”or “ ▼ ” key to choose audio and press “OK” or “MODE”
key to confirm and open or close audio. On as default.