Nextech QM3842, Instruction Manual, Page: 6 / 12

5
PRODUCT INSTALLATION:
2.
MONITOR INSTALLATION
Step 1: Connect the antenna to the wireless monitor.
Step 2: Open the locking screw and adjust the monitor to the desired viewing angle, then tighten the
locking screw to fix the monitor.
Step 3: Clean the area where the suction cup base is to be connected to the windshield or dashboard.
Now press the suction cup base onto the windshield or dashboard and move the lock lever to the
suction cup base.
Step 4:
Connect the monitor to the car charger.
Step 5: Plug the car charger into the car socket 12V, and route the cable around the edge of the windscreen
to avoid collision or endanger the safety of the vehicle and its passengers.
NOTE: The position of the display
should not affect the driver’s field of
vision. Observe the laws and safety
regulations applicable to the vehicle.