Nextech LA9038, Instruction Manual

Page: 7 / 20

6
INSTALLATION:
4. Set APN & Internet User Name & Password
Most SIM card need set APN and user name & password to visit the internet,
then the tracker can upload the location to server, send SMS to tracker can set
the APN and username & password, call the tracker SIM card supplier to get
the APN and user name & password, send SMS “APN*12345678*apnname”
to set APN, 12345678 is the tracker device password, apnname is the SIM
card data service APN name, the device will reply SMS “APN: apnname”.
Send SMS “USERNAME*12345678*username*password” to set username
& password, username is the internet visiting account name, password is the
account password, the device will reply “USERNAME: username, PASSWORD:
password”.
Note:
if the SIM card in the device is M2M card that has not SMS service, the
device can not receive SMS, then please put a normal SIM card into the device
to set the APN and username & password first, and then change the M2M card
back to device.
5. Back Up Battery & Power Down Alarm
When the tracker power supply is off or the voltage is too low, the tracker
will send power down alarm SMS to the authorized number. This means the
tracker power is removed or the tracker is removed, please confirm.
6. Back to Factory Setting
Send the SMS command to the tracker can reset the tracker setting
to the factory mode (just like new tracker). The SMS command is
FACTORY*12345678. FACTORY is command, 12345678 is tracker password.
7. Using Condition
The working temperature is -20°C to 60°C, over this range the specification
maybe can not reach the standard level. the storage temperature can reach to
-40°C to 80°C.