7
Tape Operation
Maintenance
Tape Deck Maintenance
To ensure quality recording and playback of the tape deck,
clean parts
A
,
B
and
C
shown in the diagram (after approximately
50 hours of operation, or an average of once a month).
Use a cotton bud slightly moistened with alcohol or a special head
cleaning fluid to clean the deck.
1. Open the cassette door by pressing
STOP • EJECT
.
2. Press
PLAY
and clean the rubber pressure rollers
C
.
3. Press
PAUSE
and clean the magnetic heads
A
and also the Capstan
B
.
4. After cleaning press
STOP • EJECT
.
Note:
Cleaning the heads can also be done by playing a cleaning cassette through once.
PAUSE
Press to temporarily stop the tape playing. Press again to resume operation.
STOP/EJECT
Press to stop the tape playing. Press again to open the cassette door after the
tape spools stop turning.
FAST FORWARD
& REWIND
Press to start rapid tape winding; either forward or in the reverse direction.
PLAY
Press to start playing the tape.
RECORD •
Press the
“RECORD”
and “
PLAY”
buttons together to start recording.
1. Set the
“FUNCTION”
selector to
“TAPE”
mode.
2. Press the
“STOP/EJECT”
button to open the cassette door and insert your tape.
3. Close the cassette door .
4. Press the “
PLAY”
button to play the tape.
5. Adjust the “
VOLUME”
control to the desired level.
6. Press the
“PAUSE”
button when you want to stop playing the tape temporarily.
7. Press the
“STOP/EJECT”
button when finished.
1. Press the
“STOP/EJECT”
button to open the cassette door and insert a blank tape.
2. Select the source you want to record.
To record from the radio:
Set the
“FUNCTION”
selector to
“RADIO”
mode and adjust to the
desired
station.
To record from CD:
Place a disc in the CD compartment. Set the
“FUNCTION”
selector to
“CD”
mode and select the desired track.
3. Press the
“RECORD”
and “
PLAY”
buttons together to start recording.
4. Press the
“STOP/EJECT”
button when finished.
General Operation
Playback
Recording