Please read and follow the notes below regarding the positioning of the DAB digital radio
adapter within the vehicle. The DAB adapter is supplied with both a windscreen mount and
adhesive mount for flexibility of installation.
When positioning the DAB radio adapter you must adhere to the following points;
1) The DAB adapter must not obstruct the drivers view.
2) The DAB adapter must not be positioned so that it interferes with or is in the path of
airbag deployment.
3) The DAB adapter must not obstruct your view of any of the controls or instruments in
the vehicle.
4) The DAB adapter must not obstruct the view of the wing or rear view mirrors.
The DAB adapter should be installed so as not to intrude significantly within the
wiped area. A 40mm intrusion into the green wiped area is the maximum permitted by law.
Do NOT mount the DAB adapter in front of the driver, as depicted by the red area in the
above illustration.
When installing the DAB adapter in a vehicle, always make sure that it is mounted securely.
If possible the cables running to the device should be concealed under the cars trim. Make
sure that none of the cables interfere with the drivers operating controls, such as the
steering wheel, pedals or gear lever. The cables also should not obstruct ones view of any
of the vehicles instruments.
Clean the windscreen at the point of location, prior to fitting the DAB adapter. Applying
some moisture to the suction cup may be beneficial, to ensure absolute adhesion.
IN VEHICLE INSTALLATION
DAB Radio
12
