Next YE-18000HD, User Manual

Page: 22 / 63

4. Tools
4.1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to
the factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel
and exit.
When you press OK on OTA Upgrade menu item,
available OTA service information and parameters
are displeyed. You do not need to make any
changing unless your seller inform new OTA
parameters in the future. Just press OK on the
start item. You will follow the upgrade progress up
and do not power off your product until process
finishes by re-booting.
4.3 S/W Upgrade by OTA
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select among bootloader, main code, deafaultdb, userdb and
dump. When users switch the upgrade mode,
Upgrade File will show the
corresponding file according to the table below:
4.4 Upgrade by USB
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
19