DMX 512
OUTPUT
1
1 = COMMON
2 = DATA -
3 = DATA +
4 = n.c.
5 = n.c.
5
3
4
2
AUDIO IN
(0 dB)
POWER INPUT
12 VDC - 6 W
+VDC
COMMON
1
2
3
ON
OFF
POWER
1
5
3
42
PUSH
4
Standard DMX 512 signal OUTPUT with a 5-pin cannon connector.
3
0 dB audio signal INPUT with a mono/stereo jack connector.
2
12 Vdc power INPUT with a 3-pin cannon connector.
1
Power key
Make sure you are using a shielded twisted cables suitable for the tran-
smission of the DMX 512 signal with connectors of good quality and
connection as shown on the side of the connector.
Plug the 5-pin cannon connector coming from the dimmer completly in the
DMX 512 output
Use the “push” safety hook to disconnect it and than extract it gently.
ATTENTION: the shielded part of the cable must never be connected to
the ground of the electrical system as this could cause faults during the
working of the controller.
4
1
2
3
4
2.1 Description of the rear panel and installation
GB
2.2 DMX 512 OUTPUT CONNECTION
THE DMX CHANNEL OUT ARE:
N° 1/12 DOUBLE PRESET MODE
N° 1/24 SINGLE PRESET MODE (WIDE)