1. Insert the drawer 10 to the assembled unit as shown in
diagram.
Note: If you want to disassembled the unit,
please follow the steps as the right
brief to push the drawer out.
1. Insert 6x plastic fasteners (I) into the back panel
grooves and tighten with screws provided.
2.Using screw and washer secure the
1X nylon strap (J) to the back of top panel .
3.Secure the other end of the strap to the
wall with an appropriate screw and wall
plug for your wall type (not provided).
To hide the strap behind the unit, drill the
hole lower than the top of the unit.
Warning:
Always ensure intended wall area to
STEP TWELVE
STEP THIRTEEN
I
Always ensure intended wall area to
be drilled is free from hidden electrical
wires, water and gas pipes.
NB:Wall fixings are not included - please
source suitable fixing for your wall type.
If in doubt please consult a qualified
trades person.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 6 of 6
