1.Insert 5x cambolts (D) into panel 1 and tighten
with a screwdriver.
2. Attach metal plate (G) to leg 13 with 1x bolts (E)
using an Allen key (F) to tighten.
3.Insert 2 x bolts (K) into nuts fixed on panel 1
and turn bolts (K) clockwise until tight by hands.
1. Attach leg 13 to panel 1 with 4 x bolts (E)
using an Allen key (F) to tighten.
2.Glue (B) and insert 7 x wooden dowels (A) into
panel 1.
3.Attach panels 2 & 4 to panel 1.
4.Attach panels 3 & 5 to panel 1.
5.Insert 5x camlocks (C ) into panels 2,4 & 5.
tighten with a screwdriver.
Ensuring the arrow indicator is pointing towards
STEP THREE
STEP FOUR
the panel edge before tightening with a
screwdriver
6.Cover 2 x metal pieces (L) onto 2 x bolts (K)
and thread 2 x springs (N) onto bolts (K) then
screw 2 x metal nuts (J) with spanner (I)
1. Carefully lift the unit upright. The unit should be
lifted by two people.
2. Use 4X stickers (H) to cover the camlock holes
on panels 2 , 5
3. Use 2X stickers (M) to cover the holes
on panel 3
STEP FIVE
Page 3 of 6
