PORTOFINO MINK FLIP BED DOUBLE
Produced in China for Next Retail Ltd
829302-2014-V1
829302
Assembly instructions
1
BEFORE YOU START
Warnings
Fabric composition: 65% cotton, 35% viscose
We suggest you retain these instructions for future reference
Keep fittings out of children’s reach and keep children well
away from construction area.
This product should only be used on firm level ground
Please periodically check all fittings and re-tighten as necessary
Please do not jump or stand on your bed
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause damage to the
materials and deterioration of the colour
Do’s
We suggest you spend a short time reading through
this leaflet before you start
When you are ready to start, make sure that you have the
right tools and plenty of space
Due to the size of the product we recommend that it is assembled
in the room intended for use
Unwrap all packaging materials and place the components on a
clean surface to protect it from damage,
We recommend that the packaging is used to protect the surfaces
during assembly
Carefully check that you have all the parts before
beginning assembly
Ensure the product is fully assembled as illustrated and all fixings
fully tightened before use. Check fixings
regularly to ensure they remain tight
When moving your assembled bed. It is best to lift the bed and
never to drag it. Please check that the
centre support rail is securely fixed in place
When adjusting the support legs ensure that the foot is set
5-10mm from the floor surface without the
mattress in place. When in use the legs will create the required
support for the product
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or
finishes to de-laminate
To clean your item, please use a vacuum or lightly brush clean
Never allow any kind of liquid to remain on your furniture.
Absorption can cause finishes to de-laminate
Please note:
In case of using wooden frame and wooden centre support rail,
below point should be added:
Please check that the centre support rail is securely fixed in place
In case of using metal frame and metal centre support rail with
plastic caps, below point should be
added:
Periodically check the condition of your bed slats and plastic
locating caps to ensure they are in good
condition and have not become loose.
Number of people required to assemble
We recommend two people assemble this product.
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on
0333 777 8999.
If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
1.5 hour
