3.Slot 4 X metal pieces (D) onto bolts (C),and thread
4 X springs (F) onto blots (C),then screw 4 X metal
nuts (E) with spanner (G) until tight.
1.Attach panels 5 (x2) to panels 4 (x2).
1.Attach panels 4 (x2) to panels 2 (X4) with 8 x screws (I)
using a screwdriver until tight.
1.Carefully lift the unit upright.
2.Attach panels 5 (x2) to panel 1 with 6 x screws (H)
using a screwdriver until tight as shown in diagrm.
1.Turn the table over,two persons are required.
2.Ensure to hold the table by the apron and not the
table top. Take care that the top does not flip open
whilst lifting.
STEP FOUR
STEP FIVE
STEP SEVEN
STEP SIX
Page 3 of 4
