Next MILANO WHITE GLOSS S DESK, Assembly Instructions Manual

Page: 2 / 10

Please note: Remove the protective film after assembly of this product unless it is stated in
the steps to do so - this will prevent accidental scratches during assembly
1.Insert 8 x cambolts (E) into panels 4, 5 & 6
and tighten with a screwdriver.
2.Insert 2 x bolts (L) into nuts fixed on panel 2
and turn bolts (L) clockwise until tight by hands.
1. Please remove the protective film from the
surface of 5 & 8.
2.Attach panel 5 to panel 8 with 2 x screws (H)
using an Allen key (I) to tighten.
STEP TWO
PARTS
STEP ONE
Page 2 of 10