1. Carefully lift the unit upright. The unit should be
lifted by two people.
2. Secure hanging rail 8 onto the hanging rail holder
(G) as shown.
3. Use 6 x stickers (I) to cover the holes on panel 1.
1. Attach 6 × hinges (M) to panel 10(X2) with 12 ×
screws (N) using a screwdriver clockwise until tight.
X 2 UNITS
1. Attach panels 10 (x2) to the unit with 12 × screws
(N) through hinges ( M) using a screwdriver to
tighten.
To align doors use the adjustment
diagram below.
LATERAL
VERTICAL
FRONT- TO-BACK
STEP NINE
STEP EIGHT
STEP TEN
M
N
G
Page 5 of 6
